1. … The deposit is not mashinable or forgeable. Only grinding with diamond tools is possible.Dur R (Ni) is available as a 500 mm flexible rod or … are hardfacing and rebuilding of stabilisers and other oilfield tools where maximum protection is required. Also for augers, impellers, …
  2. … SP 1.4115. The spray deposit cannot be machined with normal cutting tools, grinding is possible. Hardness approximately 50 HRc … Flame …
  3. … Filler metal specifically intended for high integrity structural service at elevated temperature so the minor alloy additions …
  4. … consumables are specifically intended for high integrity structural service at elevated temperature so the minor alloy additions …
  5. … The slag is self lifting and leaves a fine rippled shiny surface. Max. service temperature 350ºC. Corrosion resistance similar to low carbon …
  6. … Filler metal specifically intended for high integrity structural service at elevated temperature so the minor alloy additions …
  7. … be maximum 250ºC. The weld metal is machinable by special carbide tools, hardening is possible. The maximum hardness is dependent on the … jaws, crusher cones, pumps, sand, snow scratchers, stone cutting tools etc. … AA B57-62 … 14700: T Fe4 …
  8. … Weldable with Co2 and Mix gas. Suitable for creep resistant service for working temperatures up to 600 ºC.  … 2,25% Cr, 1% Mo …
  9. … wear resistance. The weld deposit can be heat treated to offer maximum service protection.  Tempered 560° C ~ 52 HRc Tempered 450° C ~ 49 HRc …
  10. … quality with ultra clean weld deposit. Suitable for creep resistant service for working temperatures up to 600º C.  … 2,25% Cr, 1% Mo …