… The deposit is not mashinable or forgeable. Only grinding with diamond tools is possible.Dur R (Ni) is available as a 500 mm flexible rod or … are hardfacing and rebuilding of stabilisers and other oilfield tools where maximum protection is required. Also for augers, impellers, …

… done as necessary. The deposit can beadditionally treated with cutting tools. … 1.2311 40CrMnMo 7 1.2343 X38CrMoV 5 1 1.2344 X40CrMoV 5 1 …

… T92/P92 steel is commonly used at service temperatures up to 620°C. V, Nb and N additions provide this …

… strengthResists corrosion and alkaline environmentsExcellent bond coat Service up to 800 °C (1470 °F) Is an ERNi-1 type specially modified for …

… consumables are specifically intended for high integrity structural service at elevated temperature so the minor alloy additions …

… T92/P92 steel is commonly used at service temperatures up to 620°C. V, Nb and N additions provide this …

… consumables are specifically intended for high integrity structural service at elevated temperature so the minor alloy additions …

… than 1.4115. The weld deposit cannot be machined with normal cutting tools, grinding is possible. Hardness approximately 45 HRc. The deposit …

… up to 460 MPa yield strength. Excellent to be used for creep resisting service at temperatures up to 500 °C.  … Typ 0,5Mo  ≤ 460 MPa,  ISO …

… Excellent alloy for making cutting tools out of mild steel … 60 HRc hardfacing alloy for cutting edges, … mixer blades, wood shredders etc.. (Excellent alloy for making cutting tools out of mild steel) … SS 60 Tig … 14700: S Fe4 …