SELECTARC NI60

Brand
Selectarc
Ceweld product
Type
Mig-Mag welding wire for Monel 400
classification
AWS
A 5.14: ERNiCu-7
EN ISO
18274: S Ni 4060(NiCu30Mn3Ti)
W.Nr.
2.4377
Applications

Shipbuilding, seawater evaporation plants, tubes, pump building, offshore etc. CEWELD® NiCu30Mn is suitable for dissimilar welding between Nickel 200-201, stainless steel, carbon steel, Inconel and Incoloy alloys, Nickel Copper and Copper nickel alloys.

Type
Mig-Mag welding wire for Monel 400
Applications

Shipbuilding, seawater evaporation plants, tubes, pump building, offshore etc. CEWELD® NiCu30Mn is suitable for dissimilar welding between Nickel 200-201, stainless steel, carbon steel, Inconel and Incoloy alloys, Nickel Copper and Copper nickel alloys.

Properties

This Nickel - Copper weld metal has properties similar to “Monel 400”. It has good strength and resists corrosion in many media, including sea water, salts and reducing acids. The weld metal is not age hardenable and when used to join Monel K-500 it has lower strength then the base metal.

Classification
AWS
A 5.14: ERNiCu-7
EN ISO
18274: S Ni 4060(NiCu30Mn3Ti)
F-nr
42
FM
6
W.Nr.
2.4377
Suitable for

2.4360, 2.4375, NiCu30Fe, NiCu30Al, Monel 400, R405, alloy K500 and dissimilar welding between these alloys.

Welding positions
PA
PB
PC
PD
PE
PF
Redrying
Not required
Gas acc. EN ISO 14175
I1
Analysis
C Si Mn Cr Ni Mo Nb Ti V Fe W Co Cu Al P S Nb+Ta
0.09 1 3.5 65 2 30 1
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Impact Energy (J) ISO-V Hardness
RT
As Welded 300 450 30 70 HRc
Product sheet
MSDS
product sheet
Ask quotation
MSDS