SELECTARC NI60

Merk
Selectarc
Ceweld product
Type
Solid Nickel based filler metal alloyed with Copper.
classification
AWS
A 5.14: ERNiCu-7
EN ISO
18274: S Ni 4060(NiCu30Mn3Ti)
W.Nr.
2.4377
Toepassingen
Shipbuilding, seawater evaporation plants, tubes, pump building, offshore etc. CEWELD® NiCu30Mn is suitable for dissimilar welding between Nickel 200-201, stainless steel, carbon steel, Inconel and Incoloy alloys, Nickel Copper and Copper nickel alloys.
Type
Solid Nickel based filler metal alloyed with Copper.
Toepassingen
Shipbuilding, seawater evaporation plants, tubes, pump building, offshore etc. CEWELD® NiCu30Mn is suitable for dissimilar welding between Nickel 200-201, stainless steel, carbon steel, Inconel and Incoloy alloys, Nickel Copper and Copper nickel alloys.
Eigenschappen

This Nickel - Copper weld metal has properties similar to “Monel 400”. It has good strength and resists corrosion in many media, including sea water, salts and reducing acids. The weld metal is not age hardenable and when used to join Monel K-500 it has lower strength then the base metal.

Classification
AWS
A 5.14: ERNiCu-7
EN ISO
18274: S Ni 4060(NiCu30Mn3Ti)
F-nr
42
FM
6
W.Nr.
2.4377
Geschikt voor

2.4360, 2.4375, NiCu30Fe, NiCu30Al, Monel 400, R405, alloy K500 and dissimilar welding between these alloys.

Lasposities
PA
PB
PC
PD
PE
PF
Herdrogen
Not required
Gas acc. EN ISO 14175
I1
Analyse
C Si Mn Cr Ni Mo Nb Ti V Fe W Co Cu Al P S Nb+Ta
0.09 1 3.5 65 2 30 1
Mechanische waarden
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Impact Energy (J) ISO-V Hardness
RT
As Welded 300 450 30 70 HRc
Product sheet
MSDS
product sheet
Ask quotation
MSDS