CEWELD NiCro 72M

<

PRODUCT SPECIFICATIONS
PACKAGING

Type

Nickel-Chromium solid MIG wire

classification

AWS

A 5.14: ERNiCr-7

EN ISO

18274: S Ni 6073(NiCr38AlNbTi)

Applications

CEWELD NiCro 72M is used for the overlay cladding of ferrous materials used in high temperature applications, and the welding of nickel-chromium-iron alloy to itself, and to steels.
Also for welding IN657 and INCO clad 671/800H.

Type

Nickel-Chromium solid MIG wire

Applications

CEWELD NiCro 72M is used for the overlay cladding of ferrous materials used in high temperature applications, and the welding of nickel-chromium-iron alloy to itself, and to steels.
Also for welding IN657 and INCO clad 671/800H.

Properties

Weld metal has good resistance against high temperature oxidation, carburization, sulfidation and to reducing-sulfurizing and metal dusting environments

Classification

AWS

A 5.14: ERNiCr-7

EN ISO

18274: S Ni 6073(NiCr38AlNbTi)

F-nr

43

FM

6

Suitable for

ASTM B163, B166, B167, B168 with UNS N06690, IN657, Incoloy 671/800H

Welding positions

Redrying

Not required

Gas acc. EN ISO 14175

I1

Analysis

C	Si	Mn	Cr	Ni	Mo	Nb	Ti	Fe	W	Co	Cu	Al	V	P	S	Nb+Ta
0.02	0.2	0.3	37	65		0.8	0.6					1				0.7

Mechanical Properties

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded		690	30	HRc

product sheet

declaration of performance

declaration of conformity

Ask quotation

MSDS

NiCro 72M welding wire

NiCro 72M welding wire

Packing info

NiCro 72M 1,14mm
Packaging	KG/unit	EanCode
BS-300	13,6	8720663419125

product sheet

Ask quotation

MSDS

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.