CEWELD Alu-Flux
Is an equivalent for UTP FLUX 4Mg

UTP FLUX 4Mg

Brand

UTP

Ceweld product

Type

Flux for aluminium brazing

classification

EN ISO

18496: FL20

Applications

Alu-Fux is for brazing from Aluminium and Aluminium Alloys with a working range from 350 to 550 °C

Type

Flux for aluminium brazing

Applications

Alu-Fux is for brazing from Aluminium and Aluminium Alloys with a working range from 350 to 550 °C

Properties

Usually combined with AlSi12 or AlSi5 filler metal.

Classification

EN ISO

18496: FL20

Suitable for

Brazing for Aluminium and Aluminium Alloys with a working range from 350 to 550 °C. Usually combined with AlSi12 or AlSi5 filler metal.

Redrying

Not required

Product sheet

product sheet

declaration of performance

declaration of conformity

MSDS

product sheet

Ask quotation

MSDS

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.

CEWELD Alu-Flux Is an equivalent for UTP FLUX 4Mg

UTP FLUX 4Mg

CEWELD Alu-Flux
Is an equivalent for UTP FLUX 4Mg