RE-ON MIG OA622

Ceweld product
Type
Medium -alloyed tubular wire on a C-Cr-Mo-W basis for high hardness up to 550ºC.
classification
EN ISO
14700: T Fe6
DIN
8555: MF 6-60-PT
Applications

Recommended for parts subject to strong abrasion and erosion with impact.

Excavator teeth, excavator cutting edges, gravel pumps, screw conveyors, blow bars, crusher rollers, road construction,
shredder plants, Turasse, rock processing, scrap grabs

Type
Medium -alloyed tubular wire on a C-Cr-Mo-W basis for high hardness up to 550ºC.
Applications

Recommended for parts subject to strong abrasion and erosion with impact.

Excavator teeth, excavator cutting edges, gravel pumps, screw conveyors, blow bars, crusher rollers, road construction,
shredder plants, Turasse, rock processing, scrap grabs

Properties

Very good abrasion resistance in combination with impact even at higher temperatures up to 550ºC. To much layers should be avoided, preheat is necessary to avoid cracking. A buffer layer with OA 4370 or OA MnCr is recommended in case of sensible basematerial or old layers. Weldable without protective gas. 

Classification
EN ISO
14700: T Fe6
DIN
8555: MF 6-60-PT
Suitable for

HRc 55-58, Cement pumps, crusher bars, hammer and blooming table rolls, mineral and brick industry.

Welding positions
PA
PB
Redrying
140°C / 24 hr
Analysis
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
0.55 0.9 2.8 7 1.6 1.8 Rem. 0.9
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 55 HRc
Product sheet
MSDS
product sheet
Ask quotation
MSDS