CEWELD L-Ag45Sn
Is an equivalent for RE-ON LAS 392

RE-ON LAS 392

Ceweld product

Type

45% Silver brazing alloy without Cadmium.

classification

AWS

A 5.8: BAg-36

EN ISO

17672: Ag 145

Applications

Brazing a weight range of different metals in maintenance and repair with excellent strength, Boiler making, Tubing, Cooling equipment etc. Do not use this alloy above working temperatures of 200 ºC

Type

45% Silver brazing alloy without Cadmium.

Applications

Brazing a weight range of different metals in maintenance and repair with excellent strength, Boiler making, Tubing, Cooling equipment etc. Do not use this alloy above working temperatures of 200 ºC

Properties

Most universal silver brazing alloy without Cadmium with extreme low operating temperature and high mechanical properties. Due to the addition of Sn. this alloy will show a bright looking joint and is more capillary then the standard silver brazing Alloys. Flux/Paste: CEWELD Super-Flux

Classification

AWS

A 5.8: BAg-36

EN ISO

17672: Ag 145

Suitable for

Steels, Copper, Copper alloys, Stainless steel, Cast Iron, Nickel and Nickel alloys. Also suitable for dissimilar joints between these metals.

Welding positions

Redrying

Not required

Note title

Melting range

640 - 680ºC

Analysis

Si	Mn	Ni	Fe	Cu	Zn	Sn	Al	Mg	Ag	Cd	P	Pb	Pd
				27	25	2.8			45

Mechanical Properties

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded		400		HRc

Product sheet

product sheet

declaration of performance

declaration of conformity

MSDS

product sheet

Ask quotation

MSDS

Certilas

Certilas

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.