Lincoln Lincore 420

Ceweld product
Type
High alloyed fluxcored wire for hardfacing.
classification
EN ISO
14700: T Fe8
DIN
8555: MF 6-GF-55-PR
Applications

Bucket teeth, conveyors, cruscher hammers, coal mine cutters, mixer blades, mixer blades etc.

Type
High alloyed fluxcored wire for hardfacing.
Applications

Bucket teeth, conveyors, cruscher hammers, coal mine cutters, mixer blades, mixer blades etc.

Properties

This alloy offers very good resistance against general abrasion and heavy shock, all weld metal requires no buffer layer except on materials considered critical or in case of old hardfacing layers. In this Situation OA 4370, ER 100 S-G or OA MnCr is recommended.Suited for wear parts subject to strong impact, abrasion and shock. In critical cases the interpass temperature should be kept at 270ºC for the best results. The weld metal is only machinable by grinding.Weldable without gas (open arc). (Also weldable under M21 mixed gas)

Classification
EN ISO
14700: T Fe8
DIN
8555: MF 6-GF-55-PR
Suitable for

54 HRc hardfacing alloy for wear resistant overlays, sand pumps, valve seats, dredger equipment, bucket teeth, stone crushing, hammers etc.

Welding positions
PA
PB
PC
PF
Redrying
140°C / 24 hr
Analysis
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
0.5 1 1.2 12.5 Rem.
Mechanical Properties
Heat
Treatment
RP0,2
(MPa)
Rm
(MPa)
A5
(%)
Hardness
As Welded 55 HRc