Lincoln Lincore 40-O

Ceweld product
Type
Seamless medium alloyed metal powder fluxcored wire without slag for hardfacing using Ar-CO2 Mixgas
classification
EN ISO
14700: T ZFe2
DIN
8555: MF 1-GF-40 GPS
Applications

375-450 HB, hardfacing and rebuilding alloy for wornout wheels, rails, tires, conveyors, crossings, shafts, bufferlayers prior to hardfacing. excelent wear and abrasion resistance against heavy impact and shock, machinable with carbide tools.

Type
Seamless medium alloyed metal powder fluxcored wire without slag for hardfacing using Ar-CO2 Mixgas
Applications

375-450 HB, hardfacing and rebuilding alloy for wornout wheels, rails, tires, conveyors, crossings, shafts, bufferlayers prior to hardfacing. excelent wear and abrasion resistance against heavy impact and shock, machinable with carbide tools.

Properties

Due to the high resistance to cracking and excelent toughness, all weld metal requires no buffer layer except on materials considered critical. Suited for wear parts subject to heavy impact and shock. The interpass temperature should be maximum 250ºC. The weld metal is machinable with carbide tip tools, hardening is possible. The maximum hardness is dependent on the base metal and is achieved already in the first layer. 

Classification
EN ISO
14700: T ZFe2
DIN
8555: MF 1-GF-40 GPS
Suitable for

Conveyors and transport surfaces, tires, bucket and loader teeth, cruscher jaws, Bufferlayers, crane wheels, axis, gear parts, winches etc.

Welding positions
PA
PB
PC
Redrying
Not required
Gas acc. EN ISO 14175
M21
Analysis
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
0.4 0.7 1.5 2.5 0.5
Mechanical Properties
Heat
Treatment
RP0,2
(MPa)
Rm
(MPa)
A5
(%)
Hardness
As Welded 40 HRc