Alutig Mg 3

Ceweld product
Type
Mig wire for welding Aluminium Magnesium alloys with less than 3% Mg..
classification
AWS
A 5.10: ER5754
EN ISO
18273: S Al 5754 (AlMg3)
W.Nr.
3.3536
Applications

Suitable for base metals with maximum 3% Mg. These alloys are suitable for a big range of applications in the construction sector, in general, and in the structural industry. Widely used in ship and vessel building.

Type
Mig wire for welding Aluminium Magnesium alloys with less than 3% Mg..
Applications

Suitable for base metals with maximum 3% Mg. These alloys are suitable for a big range of applications in the construction sector, in general, and in the structural industry. Widely used in ship and vessel building.

Properties

This alloy offers excellent weldability when properly cleaned prior to welding. Heavy parts and thicker plates should be preheated (150°C), prior to welding The alloy shows good corrosion-resistance and an excellent color-uniformity after anodizing. CEWELD® AlMg3 offers also good resistance against seawater.

Classification
AWS
A 5.10: ER5754
EN ISO
18273: S Al 5754 (AlMg3)
F-nr
22
W.Nr.
3.3536
Suitable for

Aluminium Alloys: 

AlMg Mn, AlMg 3Mn, AlMg1, AlMg2, AlMg2,7Mn, AlMg3, AlMg3,5, AlMgSi0,5, AlMgSi0,8, G-AlMg3Si, AlMn 1, AlMg 1,8

3.0515, 3.3206, 3.3315, 3.3326, 3.3535, 3.3541,

EN AW 5005A, EN AW 5754, EN AW 6060, EN AC 51100, EN AW 5454, EN AW 5251,

 

Approvals
CE
Welding positions
PA
PB
PC
PD
PE
PF
PG
Redrying
Not required
Gas acc. EN ISO 14175
I1, I3
Analysis
Si Mn Cr Ti V Fe Cu Zn Al Mg Zr Be Ga+V Si+Fe
0.5 0.3 0.15 Rem. 3.2
Mechanical Properties
Heat
Treatment
RP0,2
(MPa)
Rm
(MPa)
A5
(%)
Hardness
As Welded 80 190 20 HRc