… feather. The deposit is not mashinable or forgeable. Only grinding with diamond tools is possible.Dur R (Ni) is available as a 500 mm … cast iron or Mn-steel. The main applications are hardfacing and rebuilding of stabilisers and other oilfield tools where maximum protection …

… The CEWELD® 904L is used for welding materials of similar chemical composition which are used for …

… layer. The weld deposit will show release cracks to offer better bonding strenght with the base metal. More than 1 layer should not be …

… Basic electrode with excellent welding characteristics,  Hydrogen content HD < 3 ml/100 g. Meets NACE …

… no limit for the number of layers that can be applied in case of rebuilding but heat input should be kept low (as for Mn steel, interpass temperature should be kept < 250 °C). … Rebuilding and joining cold straining Mn steels or rebuilding parts that are subject to high impact and rolling wear. Breaker …

… basic SAW flux with low hydrogen content. Basicity: About 3,4 (according to Boniszewski) Current: DC or AC, in single or multi-wires Grain …

… cored wire have a excellent weld puddle. This wire offers a unique welding deposit with more than 1% nickel and 0,5% Cu due to the seamless …

… hardness in the first layer. The choice for the buffer layer is depending on the base metal and not always necessary.  … 55-57 HRc …

… or toughness. Grade 5 is used in aircraft components such as landing gear, wing spars, and compressor blades. Its corrosion resistance …

… Applicable for welding of joints and surfacings of stabilized, corrosion resistant CrNiMo …