… For welding heat-resistant austenitic steels of the 25% Cr, 20% Ni types. AA 310B has good general oxidation …

… with good penetration and porosity free deposit, Unique self lifting slag and improved coating against moisture pick up. (after …

… CEWELD 410 is a martensitic stainless steel that is heat-treatable. It has a nominal weld metal composition …

… solid wire for the GMAW/GTAW of low-temperature, fine-grained steels. The deposit provides good impact toughness down to -50°C and is …

… to crack, especially if the weld seams are not heat-treated.These steels are usually used for operating temperatures of up to 550°C. … … For similar 1.25%Cr-0.5%Mo-alloyed, heat-resistant, ferritic steels. 1.7335, 1.7242, 1.7337, 1.7357 13CrMo 4-5, 13CrMo 4-4, 16 …

… S3 is a Solid wire for CMn and mild steels with yield strength up to ~460 MPa Typical with FL 155 Flux. … …    Shipbuilding grades A-E, AH40-EH40, Boiler steels P235GH-P355GH. … S3 … A 5.17: EH10K … A 5.23: EH10K … 14171-A: S3 …

… has no risk for cracks and can also be applied on austenitic manganese steels. The weld deposit is good machinable. Very good weld deposit …

… demanding applications, we are proud to be the pioneer in offshore and heavy construction and we thank our customers for choosing CEWELD® …

… agglomerated rutile flux with Mn and Si pick-up, suitable for carbon steel welding with two or three passes. Basicity: about 0,4 (according …

… weld metal requires no buffer layer. Suited for wear parts subject to heavy pressure, impact and shock. The interpass temperature should be … hammers, lime stone crushing rollers, crossings, concrete bars, crane, railway and tram tracks, conveyors and transport surfaces, kiln …