… seawater and against fouling. Suitable for dissimilar welding of Monel Alloy 450 to Nickel 200 and or other Copper -Nickel alloys. Small diameters can be used in all positions. … Cu7158 … 2.0838 Mat.n: 2.0878, 2.0882,  (Monel 67): Wrought and Cast Alloys of 70-30, 80-20 and 90-10 Copper Nickel Alloys, Monel Alloy 450, …

… and N additions provide this ‘creep strength enhanced ferritic’ (CSEF) alloy with improved high temperature creep resistance compared to standard CrMo creep resistant alloys. … For matching P92, 9%Cr1.7%W0.5%Mo, creep resisting …

… temperature properties are required. It is not recommended to use this alloy for welding aluminium alloys with a high magnesium content. Low melting point: 521 - 584°C … …

… construction, pressure pipe, turbine and boiler construction. The alloy is also used alloy is also used in the chemical and petrochemical industry. The low … insensitivity to temper embrittlement. … For similar 1.25%Cr-0.5%Mo-alloyed, heat-resistant, ferritic steels. 1.7335, 1.7242, 1.7337, …

… especially at high temperatures, due to its high Cr content. The alloy is fully austenitic and is therefore sensitive to hot cracking. … for use under intermittent oxidation depend on cycle frequency. This alloy can withstand relatively severe thermic shock, and is superior to …

… Due to high molybdenum content this alloy offers excellent resistance to stress & corrosion cracking, … against pitting and crevice corrosion, dissimilar joint of nickel alloys and stainless steels, … NiCrMo-4 2.4819, 1.7752, 2 NiMo16Cr15W … B574, SB574, B575, SB575, B622  UNS N10276,  Hasteloy C276, NiCrMo alloys, Inconel Alloy C276, Nicrofer 5716MoW … AA C-276 … A 5.34: E …

… Very good deoxidization. Surfacing and joining of Copper and CuSn-Alloys. Widely used in oven soldering. High quality alloyed copper wire. Sound, pore free deposits and good electrical conductivity. Excellent corrosion resistance … Tin bronze alloy of minimally 6% tin for virtually all welding procedures. Very …

… especially at high temperatures, due to its high Cr content. The alloy is fully austenitic and is therefore sensitive to hot cracking. … frequency. In no case shall a temperature of 1000°C be exceeded. This alloy can withstand relatively severe thermic shock, and is superior to …

… 686 (UNS N06686/W.Nr. 2.4606) is a single-phase, austenitic Ni-Cr-Mo-W alloy offering outstanding corrosion-resistance in a range of severe … to general, pitting and crevice corrosion increases with the alloying (Cr+Mo+W) content, and NiCrMo 686 scores higher than … … Duplex, super-duplex and super-austenitic stainless steels, nickel alloys such as UNS N06059 and N06022, INCONEL alloy C-276, and INCONEL …

… CEWELD SP 80/20 NiCr is a nickel-chromium electrical-resistance alloy for use at operating temperatures up to (2100 °F) 1150 °C. It … conditions of frequent switching or wide temperature fluctuations. The alloy has a low temperature coefficient of resistance, making it …