… Due to the high resistance to cracking and toughness, all weld metal requires no buffer layer except on materials considered critical. … and shock. The interpass temperature should be maximum 250ºC. The weld metal is machinable by special carbide tools, hardening is possible. The maximum hardness is dependent on the base metal and is achieved in the first layer. … 55-62 HRc, T Fe2   … AA …

… Extremely crack resistant weld metal conditioned by the basic slag. Low spatter loss, easy slag … for joining high carbon steels and when welding critical mixed base metal combinations. Ideal metallurgical choice for repair welding and production as well as for …

… Due to the high resistance to cracking and toughness, all weld metal requires no buffer layer. Suited for wear parts subject to heavy … and shock. The interpass temperature should be maximum 250ºC. The weld metal is machinable with carbide tip tools, hardening is possible. The maximum hardness is dependent on the base metal and is usualy already achieved in the first layer. … Rails …

… Due to the high resistance to cracking and excelent toughness, all weld metal requires no buffer layer except on materials considered critical. … and shock. The interpass temperature should be maximum 250ºC. The weld metal is machinable with carbide tip tools, hardening is possible. The maximum hardness is dependent on the base metal and is achieved already in the first layer.  … Conveyors and …

… structure stabilizers: Titanium minimizes grain growth in Weld Metal zones (WM) due to titanium nitride (TiN) precipitation in the still liquid metal in these zones, thus avoiding the risk of brittleness, which may sometimes occur when very thick welds are made (> 3 mm of sheet metal to be welded). Niobium traps the residual C and N through its …

… Absolute crack resistant weld metal conditioned by the high-basic slag combined with ultra low … for high-carbon steels and  welding critical  mixed combinations. Metallurgical ideal filler metal for repair and production welding as well as for buffer layers. … …

… Due to the high resistance to cracking and toughness, all weld metal requires no buffer layer except on materials considered critical. … and shock. The interpass temperature should be maximum 250ºC. The weld metal is machinable by special carbide tools, hardening is possible. The maximum hardness is dependent on the base metal and is achieved in the first layer. For material considered …

… Fully austenitic weld metal with high resistance against stress corrosion cracking and … Ni, Mo and Cu. Sufficient resistance against oxidizing acids. The weld metal is corrosion resistant in sea water. The nickel content of this … pulp and paper manufacturing, flue gas desulphurization systems and metal pickling operations. SA Alloy 825 strip is developed for cladding …

… This Nickel - Copper weld metal has properties similar to “Monel 400”. It has good strength and … in many media, including sea water, salts and reducing acids. The weld metal is not age hardenable and when used to join Monel K-500 it has lower strength then the base metal.  … 2.4360, 2.4375, NiCu30Fe, NiCu30Al, Monel 400, R405, Alloy …

… CEWELD® NiCu30Mn is a Nickel - Copper weld metal and has properties similar to “Monel 400”. It has good strength … in many media, including sea water, salts and reducing acids. The weld metal is not age hardenable and when used to join Monel K-500 it has lower strength then the base metal. … 2.4360, 2.4375, NiCu30Fe, NiCu30Al, Monel alloy 400, R405, …