- … Absolutely crack resistant weld metal conditioned by the high-basic slag in combination with very low …
- … This pure aluminum filler metal offers excellent weldability when properly cleaned prior to …
- … first layer. The choice for the buffer layer is depending on the base metal and not always necessary. … 55-57 HRc hardfacing alloy against …
- … suited to use as first layer in case off multi-layer welding. The weld metal will show no undercut !Preheating is normally done to slow down …
- … by the firm Mammoet to bring the Russian submarine the Koersk to the surface. Welded bushings were slid over a long steel cable, which then …
- … Carbide deposits. The deposit gives a very good hardness, all spray metal requires no buffer layer except on materials … is only machinable by grinding. … High-alloyed tubular wire for metal spray on a C-Ni-B- carbide basis for extreme hard deposits on …
- … The filler metal has low levels of tramp elements (eg. Sn, As, Sb and P) providing …
- … The weld metal has excellent strength and oxidation resistance at high …
- … losses. The slag is self lifting and leaves a fine rippled shiny surface. Max. service temperature 350ºC. Corrosion resistance similar …
- … with a thick rutile coating and a recovery of 150%. For joining and surfacing in mechanical engineering, body and wagon building as well as …