1. … listed below reflect utilization of a post-weld heat treatment between 1020°C (1875°F) and 1050°C (1925°F) for one hour, followed by precipitation hardening between 612°C (1135°F)  UTS ~ 1130 MPa and YS ~ 900 MPa … Suitable for precipitation hardening stainless steel used for welding …
  2. … Self fluxing alloy with excellent corrosion and wear resistance suitable for working temperatures Up to 820°C. CEWELD® NiCrBSi 62 offers … oxide free. The low friction properties makes the alloy excellently suitable for metal to metal wear. Machinable by grinding. … Turbine …
  3. … to undergo a heat treatment after welding so the filler metal must be suitable for the application. Recently new welding consumables have been developed based on current knowledge and combined with the …
  4. … one of “The first seamless rutile FCW with extreme low hydrogen for S690” Excellent for use in positional welding where high deposition rate is required, suitable for temperatures down to -60 ºC ( with offshore Approval down … 1.8927, 1.8931, 1.8928, 1.8974,  1.7147, 1.7149, 1.8734 S620Q, S620QL, S690Q, S690QL, S620QL1-S690QL1, 20MnCr65, 28CrMn4-3 L480 - L550, X65, …
  5. … solid wire for the GMAW/GTAW of low-temperature, fine-grained steels suitable for NACE requirements. The deposit provides good impact toughness down to -50°C and is especially suitable for use in the offshore industry such as riser pipes that often …
  6. … and techniques evolve constantly. Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the … to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the …
  7. … slag in combination with very low hydrogen content. Well suited for the economic joining of high strength steels and cryogenic … 15 kJ/cm should not be exceeded. The working temperature should be between 100°C (212 °F) and 150°C (302 °F) . As welding flux FL 155 should … 1. 8925, 1.8940, 1.8983, 1.8797, 1.8933, 1.8934, 1.8941, 1.8997 S690Q-S890Q, S690QL-S890QL,  S720MC ASTM A 709 Gr. 100 Type B, E, F, H, …
  8. … wire that offers excellent modelling ability, therefore excelently suitable for position welding at high currents. The weld deposit shows reliable impact properties down to -60°C. Particularly suitable for MAG orbital welding and for welding on ceramics in all …
  9. … offshore requirements for sub zero temperatures down to -60°C.  Suitable for steel types up to 550 MPa yield strength, excellent welding … low hydrogen content below HD 3 ml/100gr weld metal. The weldmetal is suitable for longer post weld heat treatments as applied in Riser …
  10. … weld deposit due to the special basic coating and his alloy nature. Suitable for working temperatures between -196 °C and +650 °C. Recovery 150% with excellent arc stability and …