… Welding procedure (including preheat temperature, interpass temperature and PWHT) …

… for stabilized and non-stabilized CrNi steels. Heat resistant up to 350°C. Excelent toughness properties down to -196°C. Good resistance to … ISO 15608: 8.1  Austenit ≤ 19 % Cr 9%Ni ,TÜV 1000: Gr. 21 - 22 (29 max.350°C), 1.4301, 1,4306, 1.4307, 1.4308, 1.4311, 1.4312, 1.6900, 1.6901, …

… cooling speed it is better to keep the work peace at a low temperature during welding and hammer immediately after welding. … Spheroidal Cast … EN-GJL-100, EN-GJL-150, EN-GJL-200, EN-GJL-250, EN-GJL-300, EN-GJL-350, GG10, GG15; GG20, GG25; GG30; GG35; GG40 EN 1562: EN-GJMB-350, EN-GJMB-550 , EN- GJMW-350, EN- GJMW-550 , GTS 35, GTS 55, GTW 35, …

… to the extreme high hardness, please consult us for a succesfull procedure.  … Hardfacing Ni-hard in the cement industry …

… up to much higher temperatures. Preheating is recommended at 150 - 350° C. depending on the thickness of the base metal. Similar base …

… The filler metal shows remarkable bonding properties and fluididity during welding. … AL 2219, AL 2014; AlCu-cast-alloys, not suitable for …

… resistance to intercrystallin corrosion and wet corrosion up to 350°C (662 °F). Corrosion-resistance is similar to low-carbon CrNiMo …

… alloy containing Nickel for more strength and bridging capability during brazing. Due to the special flux coating this type is mostly …

… choosing CEWELD® filler metals in more than 60 countries worldwide.  During the last decade a huge number of new alloys have been developed  …

… third parties that enables you to use only one wire to cover more procedures up to 460 MPa yield strength steels. CEWELD AA M460 can also be … Gr. A, B, C; A 181 Gr. 60, 70; A 283 Gr. A, C; A 285 Gr. A, B, C; A 350 Gr. LF1; A 414 Gr. A, B, C, D, E, F, G; A 501 Gr. B; A 513 Gr. …