… weld cracking and produces bright, almost smut-free welds. Not recommended for anodizing. Non-heat treatable. Thicker sections should be …

… thanks to the Titanium carbides. The choice for the buffer layer is depending on the base metal and not always necessary.  … HRc 54-59, …

… the base metal creep properties. These consumables are specifically intended for high integrity structural service at elevated temperature so …

… Carbide size: 2,5 μm FSSS Density (ISO3923-2): 4.2-5.5 g/cm³ (dependent on designated size) Particle shape: preponderantly spherical …

… Filler metal specifically intended for high integrity structural service at elevated temperature so …

… considered critical. In this Situation Ceweld SP NiAl is recommended. Suited for wear parts subject to heavy abrasion. The interpass …

… maximum 5% Mg. Zirconium added as grain refiner to improve both the bending and corrosion resistance. … Aluminium alloys: AlMg4,5Mn, …

… influances. SA Corten wire can be used with FL188 (or an other type depending on the requirements and application). … CuNi, Reh ≤ 460MPa ISo …

… Surfacing and joining of Copper and CuSn-Alloys. Widely used and recommended for oven soldering. High quality alloyed copper wire Sound, pore … Surfacing and joining of Copper and CuSn-alloys. Widely used and recommended for oven soldering. Mat.n: 2.1016, 2.1020, 2.1030, 2.1050, …

… layers. In this Situation OA 4370, ER 100 S1 or OA MnCr is recommended.Suited for wear parts subject to strong impact, abrasion and …