… words: you can always rely on us and our partners. We are THE FILLER METAL SPECIALIST … Dealer policy …

… surfaces and self releasing slag. This wire deposits low carbon weld metal of about 23%Cr-13%Ni-2.3%Mo … ISO 15608: 8.1  Austenit ≤ 19 % Cr …

… Due to the high resistance to cracking and toughness, all spray metal requires no buffer layer except on materials considered critical. …

… High mechanical properties and very good weldability, suitable for high operating …

… CoCrMo alloys are non magnetic and offers extreem resistance against fatique. …

… Good flowing characteristics. Very easy to use with high mechanical properties.  … Copper to Copper (without flux), Copper alloys, Brass, Copper-Sn alloys with flux. … L-CuP7 Sn7 … A 5.8: BCuP-9 … 17672: CuP 385 …

… against impact wear as well as permanent stress by heat influence, metal wear and high surface pressure  … 1.4317, 1.4313, …

… copper wire for the Tig process (Mig brazing as well) • The weld metal is a Copper- Silicon bronze • Sound, pore free deposits on … plates in the car industry and also for cladding CuMn, CuSiMn and CuZn alloys. Suitable for cladding cast iron and un- and low alloyed steels. …

… Mechanical properties listed below reflect utilization of a post-weld heat …

… Special alloy for welding aluminium-magnesium based alloys with maximum 5% Mg. Zirconium added as grain refiner to improve both the bending and corrosion resistance. … Aluminium alloys: AlMg4,5Mn, AlZnMgCu1,5, AlMg5, AlMg3, AlMg5, AlMg2Mn0.8, …