… FL 880 is a fused flux for SAW welding stainless steels and Nickel based alloys. Basicity: about 1,3 …

… The Ceweld AA 904L is used for welding materials of similar chemical composition which are used for …

… Submerged arc welding wire for weather resistant steels such as Corten and Patinax to …

… of intergranular corrosion. The higher silicon content improves the welding properties such as wetting and results in a bright seam. … ISO …

… deposits are air-hardenable that can normally be heat-treated after welding. … 1.4000, 1.4001, 1.4002, 1.4003, 1.4006, 1.4008,  1.4021, …

… impact levels. Very good weld deposit appearance and outstanding welding properties on both AC and DC+. Preheating is not required. … …

… and mobile-annealing ovens, and various other methods. In the Welding Solution Center we  demonstrate, among other things,our 50 kVA …

… treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, G-AlSi11 G-AlSi12 (Cu), G-AlSi7Mg, G-AlSi6Cu4 , …

… to metal wear in hot working circumstances. The hardness is 45-53 HRc. Best properties are achieved with our agglomerates flux FL 838 or fused …

… above 815 °C (1500°F) up to 1149 °C (2100°F), especially when welding on base metals of nickel-iron-chromium alloys. … Inconel alloys …