… Excellent weldabillity in combination with FL 860 ESHC with high welding speed and deposition rate. The weld seam shows a fine rippled … to hardfacing and or build up layers prior to corrosion resistant stainless steel and Nickel based layers. … SA S275 strip …

… above 815 °C (1500°F) up to 1149 °C (2100°F), especially when welding on base metals of nickel-iron-chromium alloys. … Inconel alloys …

… and impact values makes this electrode a excellent choice for critical welding applications.  … Screening steels Tools steels* Low alloyed steels * Austenitic steels with Mn : … XMn120Mn12, 1.3401, C45, dissimilar joint welding between steel and stainless steel such as: Armor plate, high carbon steels. Recommended …

… Cladding on low alloyed steels in case a 18/8/2 (AISI 316) CrNiMo layer is required in the first layer. … Strip cladding on low alloyed steels in case a 18/8/2 CrNiMo (AISI 316) layer is required in the …

… wire for high temperature creep resistant 1.25%Cr-0.5%Mo ferritic steel, i.e. P11/P12 Typical with FL 155 Flux or FL 160 … Type 1Cr …

… solid wire for the GMAW/GTAW of low-temperature, fine-grained steels. The deposit provides good impact toughness down to -50°C and is …

… range of alloys. Thicker sections should be preheated (150°C) prior to welding. … Aluminium alloys: AlMg3, AlMg4, AlMg5,AlMgSi0.5, AlMgSi1; …

… and weldability, better wetting properties compared to solid wires.Excellent weld metal quality and X-ray soundness and excellent …

… Special alloy for welding aluminium-magnesium based alloys with maximum 5% Mg. Zirconium …

… Special alloyed copper rods for Tig welding. The weld metal is a Cu-Al bronze. Sound, pore free deposits. … Suitable for seawater resistant applications. Joining steel to copper alloys, cast iron and or bronze. Excellent for metal …