… A continuous, solid, corrosion-resistant, duplex wire for welding austenitic-ferritic stainless alloys of the 22% Cr, 5% Ni, 3% …

… impact levels. Very good weld deposit appearance and outstanding welding properties on both AC and DC+. Preheating is not required. … …

… FL CS155 is a fused flux for SAW welding un and low alloyed carbon steels. Basicity: about 1,05 …

… The CEWELD® E 6013 T is eminently weldable and possesses excellent welding properties in all positions except vertically down. Easy …

… Submerged arc welding wire for fine grain steels where high impact values are …

… properties are required. It is not recommended to use this alloy for welding aluminium alloys with a high magnesium content. Low melting …

… temperature should be between 100°C (212 °F) and 150°C (302 °F) . As welding flux FL 155 should be used because of its high basicity and low …

… resistance in seawater and against fouling. Suitable for dissimilar welding of Monel Alloy 450 to Nickel 200 and or other Copper -Nickel …

… Mo content, with low carbon content (less than 0.05%), to be used for welding creep resistant steels. … For 2.5%Cr-1%Mo-alloyed, …

… resistant alloy with very good deformability properties and excellent welding caracteristics. Weldable under Co2 and Mixed gas. … Reh ≤ 620 …