- … High quality alloyed copper wire for the Mig process (Mig brazing as well). The weld metal is a Copper-Aluminum bronze. Sound, …
- … even at higher temperatures. The deposit gives already a very good hardness in the first layer. A buffer layer with CEWELD® OA 4370 or … material or old layers. Weldable without protective gas. … 62-66 HRc hardfacing alloy for use in Cement, Mineral and brick industry: screws, …
- … weld metal composition of 12% Chromium. These weld deposits are air-hardenable that can normally be heat-treated after welding. … 1.4000, …
- … and Powder HVOF DUR 1 (45/15). It contains a higher fraction of hard, brittle carbides than Powder HVOF DUR 6 (45/15), and has … pump vanes, bearing bushes and narrowneck glass mold plungers. Hardfacing of engine valves, pinch rollers in the metal-processing …
- … deposit can be machined with tungsten tool tips and by grinding. The hardness of the weld deposit will degrees 16% at 300 °C and about 30% …
- … deposit can be machined with tungsten tool tips and by grinding. The hardness of the weld deposit will degrease 16% at 300°C and about 30% …
- … with complex carbide structure. The deposit gives a extreme high hardness and is suitable for corrosion protection, homogeneous particle …
- … for the repair of the capillary losses of brazed joints with lower silver containing Phosphor-Copper Alloys. Ideal where the heat feeding …
- … copper-aluminum alloy without Zn with high toughness and improved hardness. “Very good weldability compare to the more common Al. …
- … even at higher temperatures. The deposit gives already a High hardness in the first layer. A buffer layer is recommended in case of … protective gas.Corresponding electrode: CEWELD® Dur 62 S … 61-64 HRc hardfacing alloy, Cement, Mineral mixing, hammers, coke wear plates …