1. … vanadium and molybdenum offers better cutting properties and higher hardness. Hardness: 570-660 HB … Mixer blades, cutting knives, pumps, loader …
  2. … like CEWELD E DUR 350 Kb that delivers a welding deposit of less hardness. Overlays on steel with high tensile strength should be buffered with CroNi 29/9 HL or 4370 HL. Up to 3 …
  3. … and neutral environments, whereas the nitrogen allows superior strength at high temperatures. Therefore, this filler wire shows … (most suitable temperature range is 850 - 1100 °C), high creep strength, very good resistance to isothermal and, particularly, cyclic …
  4. … can be polished and is scale-resistant up to 900°C. The achievable hardness of the weld metal is mainly influenced by the dilution with … the dilution and the C content of the base material, the higher the hardness of the weld metal. The preheat and interpass temperature …
  5. … deposit can be machined with tungsten tool tips and by grinding. The hardness of the weld deposit will degrees 20% at 600 °C and has a nominal hardness of 49-53 HRc at room temperature. The weld deposit is high …
  6. … recommended for welding fine grained similar alloyed high yield strength steel > 960 MPa in case high impact values are required at sub zero temperatures. Hydrogen content HD < 4 …
  7. … Weld metal deposited by SA Nicro 600 has high strength and good corrosion resistance, including oxidation resistance and creep-rupture strength at elevated temperatures. Use FL 860 ESHC flux … SA Nicro 600 …
  8. … cracks and fissures. Extreme good deposition rate compare to MMA. High strength and good bonding weld metal. NiFe36 has a composition that … heating and the cooling period. The weld deposit also retains good strength and toughness at cryogenic temperatures and has a low …
  9. … overlay welding by SMAW No dilution with the basemetal and a full high hardness in the total thickness of the plate No excessive heat that effects the basemetal or cause loose in strength Two times faster to apply compare to big overlay welded plates …
  10. … Good flowing high strength Ni-brass alloy containing Nickel for more strength and bridging capability during brazing with excellent …