CEWELD OA 50

<

PRODUCT SPECIFICATIONS
PACKAGING

Type

C-, Cr-, Si, Mn- Alloyed flux cored wire on parts wich subjected to abrasive wear and medium impact

classification

EN ISO

14700: T Fe16

Toepassingen

Rebuilding and or protecting parts that faces abrasion with medium impact

Type

C-, Cr-, Si, Mn- Alloyed flux cored wire on parts wich subjected to abrasive wear and medium impact

Toepassingen

Rebuilding and or protecting parts that faces abrasion with medium impact

Eigenschappen

High C-, Cr- alloyed flux-cored wire electrode which forms extremely hard carbides for extremely hard deposits on parts subject to excessively heavy abrasive wear weldable without protective gas. More than 3 layers should not be deposited. A Buffer layer with CEWELD® OA 4370 or CEWELD® OA MnCr is recommended in case of old layers or critical base metals.. Equivalent in SMAW: CEWELD® Dur 62S

Classification

EN ISO

14700: T Fe16

Geschikt voor

Trash crushing, impact resistant

Lasposities

Herdrogen

140°C / 24 hr

Analyse

C	Si	Mn	Cr	Fe
3.2	1.8	1.8	16	Rem.

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				52 HRc

product sheet

declaration of performance

declaration of conformity

Ask quotation

MSDS

OA 50

OA 50

Packing info

OA 50 1,6mm
Packaging	KG/unit	EanCode
BS-300	15	8720663403629

product sheet

Ask quotation

MSDS

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.