CEWELD 4115 HLS

<

PRODUCT SPECIFICATIONS
PACKAGING

Type

High recovery, corrosion resistant stainless steel stick electrode

classification

AWS

A 5.4: ~E 430HMo-26

EN ISO

3581-A: ~E Z 17 1 B 42

W.Nr.

1.4115

Toepassingen

Hardfacing shafts from stainless steel parts, molt repairs, rebuilding pump parts etc. Suitable for plating and joining equal and similar ferritic Cr-steels and cast steels. Proper weldings are subject to the recommended heat treatment. This alloy is specially suitable for sealing surfaces on water-, steam and gas-valves, especially for sulphuric gases. The deposit is resistant to seawater, thin acids and scale resistant in air and oxidizing gases up to 950°C . The weld deposit can be tempered.

Type

High recovery, corrosion resistant stainless steel stick electrode

Toepassingen

Hardfacing shafts from stainless steel parts, molt repairs, rebuilding pump parts etc. Suitable for plating and joining equal and similar ferritic Cr-steels and cast steels. Proper weldings are subject to the recommended heat treatment. This alloy is specially suitable for sealing surfaces on water-, steam and gas-valves, especially for sulphuric gases. The deposit is resistant to seawater, thin acids and scale resistant in air and oxidizing gases up to 950°C . The weld deposit can be tempered.

Eigenschappen

High deposition rate and excellent weldability on DC +. Stainless steel alloy for joining and cladding 17% Chromium alloys and cladding components where heat and corrosion resistance simmilar to AISI 304 is required. The weld deposit can sustain working temperatures up to 450° C. and will offer a high hardness and wear resistance.

Classification

AWS

A 5.4: ~E 430HMo-26

EN ISO

3581-A: ~E Z 17 1 B 42

F-nr

1

FM

5

W.Nr.

1.4115

Geschikt voor

1.4122 (G)X35CrMo17, 1.4313, 1.4000, 1.4001, 1.4002, Cast steels

Lasposities

Herdrogen

300°C / 2 hr

Analyse

C	Si	Mn	P	S	Cr	Ni	Mo	N	Cu	Nb+Ta	Nb	Ta	W
0.18	0.4	0.7			16.6		1

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded	>300	>450	>15	43 HRc
720°C±15°C 2h	>300	>450	>15	200 HB

product sheet

declaration of performance

declaration of conformity

Ask quotation

17 chromium stick welding electrode with high recovery

high recovery electrode for welding 403, 409, 430 and 442 stainless steel

Packing info

4115 HLS
Packaging	KG/unit	EanCode

product sheet

Ask quotation

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.