https://pro.cdn.certilas.com/backoffice_media/17711/CuAl8Ni2-Tig-aluminium-bronze-welding-wire.mp4

CEWELD CuAl8Ni2 Tig
Is een equivalent voor

SELECTARC CUA8NI TIG

Merk

Ceweld product

Type

TIG Aluminium / Nickel alloyed copper welding wire

classification

EN ISO

24373: Cu 6327 / CuAl8Ni2Fe2Mn2

Toepassingen

Joint welds or building up of aluminum bronze. Cladding components undergoing metal to metal wear under high pressure. Especially suited for marine environments. The addition of nickel improves corrosion resistance in heat and rough seawater.

Type

TIG Aluminium / Nickel alloyed copper welding wire

Toepassingen

Joint welds or building up of aluminum bronze. Cladding components undergoing metal to metal wear under high pressure. Especially suited for marine environments. The addition of nickel improves corrosion resistance in heat and rough seawater.

Eigenschappen

Special alloyed copper wire for the TIG process. The weld metal is a Cu-Al-Ni bronze. Sound, pore free deposits on ferrous and non-ferrous base materials. Excellent resistance to cavitations and stress corrosion cracking.

Classification

EN ISO

24373: Cu 6327 / CuAl8Ni2Fe2Mn2

Geschikt voor

This filler metal with increased strength and corrosion properties is verry well suited for Ship propellers, shipbuilding, pump building, shafts, guide grooves etc. W.Nr: 2.0916,2.0920, 2.0928, 2.0932, 2.0936, 2.0940, 2.0960, 2.0962, 2.0966, 2.0970, 2.0978, 2.0980.

Lasposities

Herdrogen

Not required

Gas acc. EN ISO 14175

I1, I3

Analyse

C	Si	Mn	P	S	Ti	Fe	Cu	Zn	Pb	Sn	Al	As	Ni+Co
	0.1	2				2	Rem.	0.1	0.01		8.5		2.5

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded		530		140 HB

product sheet

declaration of performance

declaration of conformity

Ask quotation

MSDS

product sheet

Ask quotation

MSDS

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.