SELECTARC ALG4M TIG

Merk
Ceweld product
Type
Tig aluminium welding wire with high corrosion resistance
classification
AWS
A 5.10: ER5183
EN ISO
18273: S Al 5183 (AlMg4,5Mn0,7(A))
Toepassingen
Filler metal for Magnesium and Manganese alloyed Aluminium with a maximum Magnesium content of 5%. This alloy shows very good mechanical properties that make it ideal for applications in shipyards, in car and railway industry and constructions of reservoirs and tanks.
Type
Tig aluminium welding wire with high corrosion resistance
Toepassingen
Filler metal for Magnesium and Manganese alloyed Aluminium with a maximum Magnesium content of 5%. This alloy shows very good mechanical properties that make it ideal for applications in shipyards, in car and railway industry and constructions of reservoirs and tanks.
Eigenschappen

Excellent weldabillity and good mechanical strength combined with good corrosion resistance against seawater are typical for this alloy. The weld deposit is free from porosity due to the special shaving process and cleaning method during production. AlMg4,5Mn is one of the highest grades within the range of aluminum alloys and covers a huge range of alloys. Thicker sections should be preheated (150°C) prior to welding.

Classification
AWS
A 5.10: ER5183
EN ISO
18273: S Al 5183 (AlMg4,5Mn0,7(A))
F-nr
22
Geschikt voor

Aluminium alloys: AlMg4,5Mn, AlMg5, AlMg2Mn0,8, AlZnMg1, AlZnMgCu0,5, AlMgSi0,5, AlMgSi1, G-AlMg10, G-AlMg5, G-AlMg3Si, G-AlMg5Si, 3.3545, 3.3547, 3.3535, 3.3555, 3.3206, 3.3210, 3.2315, 3.3211, 3.4335, EN AW 5086, EN AW 5083, EN AW 5019, EN AW 5019, EN AW 6060, EN AW 6005A, EN AW 6082, EN AW 6061, EN AW 7020, EN AC 51300, EN AC 51400,

Goedkeuringen
CE
Lasposities
PA
PB
PC
PD
PE
PF
PG
Herdrogen
Not required
Gas acc. EN ISO 14175
I1, I3
Analyse
Si Mn Cr Ti V Fe Cu Zn Al Mg Zr Be Ga+V Si+Fe
0.7 0.1 Rem. 4.5
Mechanische waarden
Heat
Treatment
RP0,2
(MPa)
Rm
(MPa)
A5
(%)
Impact Energy (J) ISO-V Hardness
RT
As Welded 140 300 18 30 HRc