https://pro.cdn.certilas.com/backoffice_media/18263/NILO-Alloy-36-Mig-welding-wire.mp4

CEWELD NILO Alloy 36
Is een equivalent voor

MIGTIG SELECTARC FENI36

Merk

Ceweld product

Type

Filler metal with extreme low thermal expansion.

classification

W.Nr.

1.3990

Toepassingen

Welding applications that require the lowest thermal expansion to avoid solidification and reheat cracking.

Type

Filler metal with extreme low thermal expansion.

Toepassingen

Welding applications that require the lowest thermal expansion to avoid solidification and reheat cracking.

Eigenschappen

NILO Alloy 36 is used for welding NILO Alloy 36, NILO Alloy 36 is formulated to have low thermal expansion characteristics similar to NILO Alloy 36, while providing freedom from solidification and reheat cracking. NILO Alloy 36 is available for Tig, Mig and SAW process.

Classification

W.Nr.

1.3990

Geschikt voor

NILO Alloy 36, Invar, cast Iron

Lasposities

Herdrogen

Not required

Gas acc. EN ISO 14175

I1, I3

Analyse

C	Mn	Ni	Fe	Nb	Ti
0.25	0.5	36	Rem.	1.5	1

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Impact Energy (J) ISO-V	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	RT	Hardness
As Welded	360	550	25	60	HRc

product sheet

declaration of performance

declaration of conformity

Ask quotation

product sheet

Ask quotation

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.