CEWELD L-Ag34Sn
Is een equivalent voor

Lastek 34V

Ceweld product

Type

High silver containing cadmium free brazing alloy.

classification

EN ISO

17672: Ag 134

Toepassingen

L-Ag30Sn is for brazing a weight range of different metals in maintenance and repair with excellent strength, Boiler making, tubing, cooling equipment etc.

Type

High silver containing cadmium free brazing alloy.

Toepassingen

L-Ag30Sn is for brazing a weight range of different metals in maintenance and repair with excellent strength, Boiler making, tubing, cooling equipment etc.

Eigenschappen

The presence of tin improves the fluidity and is useful to increase the activity of the flux. Do not use this alloy above working temperatures of 200 ºC.
Flux/Paste: CEWELD Super-Flux

Classification

EN ISO

17672: Ag 134

Geschikt voor

Brazing: Steels, Copper, Copper alloys, Stainless steel, Nickel and Nickel alloys. Also suitable for dissimilar joints between these metals.

Lasposities

Herdrogen

Not required

Note title

Melting range

630 - 730°C

Analyse

Si	Mn	Ni	Fe	Cu	Zn	Sn	Al	Mg	Ag	Cd	P
				36	28	2.5			34

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded		450		HRc

Product sheet

product sheet

declaration of performance

declaration of conformity

MSDS

product sheet

Ask quotation

MSDS

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.