FILEUR Ni SW 6022
Merk
Ceweld product
Type
Solid nickel base filler metal for GMAW welding of high corrosion resistant alloys.
classification
AWS
A 5.14: ERNiCrMo-10
EN ISO
18274: S Ni 6022(NiCr21Mo13Fe4W3)
W.Nr.
2.4635
Toepassingen
CEWELD® NiCrMo 622 is used for welding of nickel-chromium-molybdenum alloys as well as for overlay cladding on carbon, low alloy, or stainless steels. They are also used for dissimilar joints between nickel-chromium-molybdenum alloys and stainless, carbon, or low alloyed steels. Also recommended for joining Molybdenum-containing stainless steels, low alloyed steels and dissimilar welding between earlier mentioned type of steels.,
Type
Solid nickel base filler metal for GMAW welding of high corrosion resistant alloys.
Toepassingen
CEWELD® NiCrMo 622 is used for welding of nickel-chromium-molybdenum alloys as well as for overlay cladding on carbon, low alloy, or stainless steels. They are also used for dissimilar joints between nickel-chromium-molybdenum alloys and stainless, carbon, or low alloyed steels. Also recommended for joining Molybdenum-containing stainless steels, low alloyed steels and dissimilar welding between earlier mentioned type of steels.,
Eigenschappen
CEWELD® NiCrMo 622 offers excellent corrosion resistance in oxidizing as well as reducing media in a wide variety of chemical process environments. It offers an outstanding resistance to stress corrosion cracking, pitting and crevice corrosion.
Classification
AWS
A 5.14: ERNiCrMo-10
EN ISO
18274: S Ni 6022(NiCr21Mo13Fe4W3)
F-nr
43
FM
6
W.Nr.
2.4635
Geschikt voor
Nickel-based alloys such as alloy 22 or similar materials, dissimilar welding of nickel-based alloys to each other
M no: 2.4602, 2.4605, 2.4610, 2.4819, 2.4856, 1.4565
NiCr23Mo16Al, NiCr21Mo14W, NiMo16Cr15W, NiMo16Cr16Ti, NiCr22Mo9Nb, X2CrNiMnMoNbN25-18-5-4, X1NiCrMoCuN25-20-7,
Alloy 59, Alloy C22, Alloy C-276, Alloy C-4, Alloy 625, Alloy 24, Alloy 904hMo
UNS: N06059, N06022, N10276, N06455, N0625, S34565
F574, B619, B622 and B626
W86022, N06022
Lasposities
Gas acc. EN ISO 14175
I1
Mechanische waarden
| Heat Treatment |
RP0,2 (MPa) |
Rm (MPa) |
A5 (%) |
Impact Energy (J) ISO-V | Hardness |
|---|---|---|---|---|---|
| -196°C | |||||
| As Welded | 500 | 740 | 44 | 130 | 220 HV |