FILEUR 603 M

Merk
FILEUR
Ceweld product
Type
Medium -alloyed tubular wire on a C-Cr-Mo-W-V basis for high hardness up to 550ºC.
classification
EN ISO
14700: T Fe6
Toepassingen
Recommended for parts subject to strong mineral abrasion and erosion.
Type
Medium -alloyed tubular wire on a C-Cr-Mo-W-V basis for high hardness up to 550ºC.
Toepassingen
Recommended for parts subject to strong mineral abrasion and erosion.
Eigenschappen

Very good abrasion resistance in combination with impact even at higher temperatures up to 550ºC. To much layers should be avoided, preheat is necessary to avoid cracking. A buffer layer with OA 4370 or OA MnCr is recommended in case of sensible base material or old layers. Weldable without protective gas.

Classification
EN ISO
14700: T Fe6
Geschikt voor

Cement pumps, Crusher bars, Hammer and Blooming table rolls, Mineral and Brick industry.

Lasposities
PA
PB
PC
Herdrogen
140°C / 24 hr
Analyse
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
0.55 1 2.7 6.7 1.6 1.5 Rem. 1
Mechanische waarden
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 60 HRc
Product sheet
MSDS
product sheet
Ask quotation
MSDS