… Good arc restriking even with cold wire tip, suitable for robot applications. Ideal for use of short arc and spray arc. Excellent gap …

… up to maximum 650°C (1202°F). Primary WC carbide size: 2.5 μm FSSS Apparent density (ISO 3923-2) 5.2-5.8 g/cm³ Particle shape: …

… losses. The weld deposit is capable of taking a high polish. TÜV-approval down to -120°C (> 32J). … ISO 15608: 8.1  Austenit ≤ 19 % Cr , …

… pure water environment. Similar to FM 52 but the 52M is for nuclear application where a specific (very strict) chemical analysis is …

… be machined with normal cutting tools, grinding is possible. Hardness approximately 50 HRc … Flame spray, electric spray and high speed flame …

… suitable in many sulfuric, nitric, hydrochloric, and acetic acid applications. Backup Shielding. Backup shielding protects the molten …

… FL 180, FL188, FL 155 and FL 851 depending on the requirements and application. … A, B, D, E, St 37 - St 52-3, DIN 17 100, H I, H II, …

… is required, suitable for temperatures down to -60 ºC ( with offshore Approval down to -40°C). Excellent for use on ceramic backing and MAG …

… therefore excellent all-position welding with higher currents. Applicable down to -40°C. Low spatter loss and remarkably easy slag …

… alloy possessing excellent abrasion and corrosion resistance for applications such as pump sleeves, rotary seal rings, wear pads, … It retains its hardness at temperatures in excess of 760° … Pump applications to protect sleeves seal rings, impellers and bearing …