1. … where improved corrosion resistance in specific media is needed. In order to reduce the propensity for fissuring and hot cracking, the low …
  2. … results in a bigger parameter range and improved duty cycle for the welder. … Reh < 690 MPa Iso 15608: 2.2 u 3.2 ( 460 < Reh ≤ 690(700) MPa ) …
  3. Austenitic deposit with strain hardening properties and no limmits in …
  4. … When welding, care should be taken to minimize the heat input, because materials of this composition have a tendency to embrittle in the …
  5. … DC. The carbon content of the base metal should not exceed 0,45 % in order to avoid lack of fusion.  … Scratchers, Mixers, Deep drilling, …
  6. … in chloride-bearing solutions (a form of degradation to which the austenitic stainless steels are prone). It is able to withstand a wide …
  7. … is an alloy especially developed for high-temperature applications. Because of the high high chromium and aluminum content it has excelent …
  8. … offers a easily machinable weld deposit with high ductility and no undercut. … Welding ductile, grey and malleable cast irons. Ni 99 can …
  9. … responsible for its creep strength are kept above the minimum considered necessary to ensure satisfactory performance. In this case, …
  10. … but was then adapted for application as a material for the steam headers to which the boiler tubes are connected. … Inconel alloy 740H UNS …