… Basic, Nickel alloyed (above 3%) electrode with excellent welding characteristics and easy slag removal. Extreme tough welding deposit with guaranteed excelent mechanical properties at low temperatures.HD < 5 ml/100 … Reh ≤ 460 MPa ISO 15608: 1.2, 1.3, 2.1, 9.2  1.5637, 1.6217, 1.6228, 1.0044-1.0982 …

… The Ceweld AA 904L is used for welding materials of similar chemical composition which are used for … controlled to lower levels in this alloy. Suitable only in down-hand positions. … 1.4465, 1.4500, 1.4505, 1.4506, 1.4519, 1.4531, 1.4536, …

… a very smooth seam surface. CEWELD® E 1000 S is suitable for all positions; 2,5 mm can even be used in vertical down position. Medium … excellently suitable for root runs in vertical up position in pipe welding. The slag is self detaching and the special red coating was developed to offer high resistance against moisture pick up. … CR ISO 15608: 1.1, 1.2 ( Reh < 420 MPa, Av 0°C) 1.0033, 1.0035, 1.0307, …

… Welding guidance and techniques evolve constantly. Whilst all … testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended …

… such as seawater or other chemical attack when accompanied by erosion. Welding instructions: CuMnAlNi is only Weldable on DC + and has an easy removable slag. Use the normal standard welding techniques. … Joining brass, Bronze, and steel, Ship …

… proof weld seams with practically no spatters. Better wetting and welding properties with more productivity compared to solid wires. The 0,9 and 1,0 mm can be used for all positions including vertical down and is classified as: AWS A 5.22: E 316-LT1-4 … ISO 15608: 8.1  Austenitic ≤ 19 % Cr , TÜV 1000: Gr. 21-30,  1.4583, …

… approximately the composition of ASTM 316 in the 1st layer. For welding in combination with CEWELD FL 838 and CEWELD FL 880 welding fluxes. … ISO 15608: 8.1  Austenitic ≤ 19 % Cr , TÜV 1000: Gr. 21-30,  1.4583, …

… CEWELD® 316H is designed for welding 316/316H austenitic stainless steels operating at high … long term creep conditions. This filler metal can also be used for welding 321/321H and 347/347H grades in high temperature structural … is reduced by using more ductile weld metal rather than 347H. … ISO 15608: 8.1  Austenitic ≤ 19 % Cr , TÜV 1000: Gr. 21, 22, 24,  …

… CEWELD ER80S-D2 Tig is a copper coated welding wire for welding of high strength steels, used predominantly after stress …

… This alloy offers excelent weldabillity when properly cleaned prior to welding. Heavy parts and thicker plates should be preheated (150°C), prior to welding The alloy shows good corrosion-resistance and an excellent …