… CEWELD® SG CrMnMo EN 4332: FE-WL1805 (8CrMnMo12-4-9) wire is used for welding matching, and similar, composition base materials. … 30CrMoV12, …

… treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, G-AlSi11 G-AlSi12 (Cu), G-AlSi7Mg, G-AlSi6Cu4 , …

… resistance in seawater and against fouling. Suitable for dissimilar welding of Monel Alloy 450 to Nickel 200 and or other Copper -Nickel …

… Mn, Ni, Cr and Mo alloyed basic electrode for welding low alloyed steels with yield strength > 690 MPa. Crack …

… proof weld seams with practically no spatters. Better wetting and welding properties with more productivity compared to solid wires. The …

… up to 400ºC, and up to 600ºC in the short-term range. It also shows good resistance to general corrosion. CEWELD 308H shows higher temperature and scale resistance than the standard L-type. …

… fully core-wire alloyed electrode for fabrication and repair welding on equal or similar, corrosion and heat-resistant steels and … attack of sulphourus gases at higher temperatures up to 1150 °C. When welding CEWELD 4820 AC low heat-input is required as alloys of such …

… designed to match the nickel base corrosion resistant alloy commonly known as alloy 59. The high level of Mo is similar to alloys C276 and … present in alloy C22; it is therefore considered suitable for welding this group of alloys. Alloy 59 consumables also provide strong, …

… speed it is better to keep the work peace at a low temperature during welding and hammer immediately after welding. … Spheroidal Cast Iron, Diluted Cast Iron, old Cast Iron, …

… Excellent wetting properties that enable this welding wire to weld with high welding speed due to the high manganese content. Thermal expansion is …