1. … 4370 or OA MnCr is recommended in case of old layers or critical base metals.. … 64-68 HRc Hardfacing wire used in mining, agriculture and …
  2. … suited to use as first layer in case off multi-layer welding. The weld metal will show no undercut !Preheating is normally done to slow down …
  3. … to hot cracking, good toughness and strength properties. The weld metal also work hardens. … ISO 15608: 11 (0,25 % < C ≤ 0,85 %)  Type: …
  4. … Absolutely crack resistant weld metal conditioned by the high-basic slag in combination with very low …
  5. … better wetting properties compared to solid wires.Excellent weld metal quality and X-ray soundness and excellent slag removal.Excellent …
  6. … Special alloyed copper wire for the TIG process. The weld metal is a Cu-Al-Ni bronze. Sound, pore free deposits on ferrous and … resistance to cavitations and stress corrosion cracking. … This filler metal with increased strength and corrosion properties is verry well …
  7. … better wetting properties compared to solid wires.Excellent weld metal quality and X-ray soundness and excellent slag removal.Excellent …
  8. … better wetting properties compared to solid wires. Excellent weld metal quality and X-ray soundness. … ISO 15608: 8.1  Austenitic ≤ 19 % …
  9. … The filler metal has low levels of tramp elements (eg. Sn, As, Sb and P) providing …
  10. … of SP 1.4370 exhibit low shrink and are recommend for internal diameters, particularly where thick coatings are needed. Using the … than SP 1.4316 coatings, but not as thick as SP 420-B coatings. … Metals spray wire with good corrosion resistance and low shrink factor, recommended for inside diameters. … 1.4370 … SP 1.4370 … 14919: 5.12 …