1. … carbides. The choice for the buffer layer is depending on the base metal and not always necessary.  … HRc 54-59, hardfacing alloy for …
  2. … ER 383 is used to weld base metals of similar composition to itself or to other grades of stainless …
  3. … Carbide deposits. The deposit gives a very good hardness, all spray metal requires no buffer layer except on materials … is only machinable by grinding.  … High-alloyed tubular wire for metal spray on a C-Ni-B- carbide basis for extreme hard deposits on …
  4. … The filler metal has low levels of tramp elements (eg. Sn, As, Sb and P) providing …
  5. … tensile strenght and a high resistence against sliding wear of metallic objects.It has a good retention of hardness up to 650°C and is …
  6. … stainless steel that is heat-treatable. It has a nominal weld metal composition of 12% Chromium. These weld deposits are …
  7. … with corresponding flux.  Suitable fluxes are depending on the weld metal requirements, in most cases CEWELD® FL 155 gives excellent …
  8. … and weldability, better wetting compared to solid wires.Excellent weld metal quality and X-ray soundness and excellent slag removal.Excellent …
  9. … media. Good machineability after fusion. Coatings are gas tight and metallurgically bonded to substrates due to diffusion. ▪ hardness: HRC …
  10. … first layer. The choice for the buffer layer is depending on the base metal and not always necessary.  … 55-57 HRc hardfacing alloy against …