… Nb carbides. The choice for the buffer layer is depending on the base metal and not always necessary. If applied correctly the hardfacing …

… media. Good machineability after fusion. Coatings are gas tight and metallurgically bonded to substrates due to diffusion. ▪ hardness: HRC …

… is a special alloyed copper wire for the MIG process. The weld metal is a Cu-Al-Ni bronze. Sound, pore free deposits on ferrous and … resistance to cavitations and stress corrosion cracking. … This filler metal with increased strenght and corrosion properties is verry wel …

… Extreme crack resistant weld metal due to the high basic slag in combination with a remarkable low … SA 1.41 B is not recommended in the stress relieved condition. … Base metal DIN EN ASTM Fine grain steel N+A - WStE 315 till 420 StE 315 till …

… 4370 or OA MnCr is recommended in case of old layers or critical base metals.. … 60-70 HRc Hardfacing wire used in mining, agriculture and …

… High-alloyed tubular wire for metal spray on a C-Cr carbide basis for hard and corrosion resistant …

… Usually combined with AlSi12 or AlSi5 filler metal. … Brazing for Aluminium and Aluminium Alloys with a working … range from 350 to 550 °C. Usually combined with AlSi12 or AlSi5 filler metal. … Alu-Flux … 18496: FL20 …

… ER 383 is used to weld base metals of similar composition to itself or to other grades of stainless …

… 0,5%Mo ferritic steel, i.e. P36 he have a very crack resistant weld metal due to the protective effect of the slag in combination with low …

… surfaces and self releasing slag. This wire deposits low carbon weld metal of about 23%Cr-13%Ni-2.3%Mo … ISO 15608: 8.1  Austenit ≤ 19 % Cr …