… Excellent welding properties with low spatter formation and very stable arc. Suitable for welding in all positions except vertical down. Excellent gap bridging for root welding. 118% …

… on base metals of nickel-iron-chromium alloys. High mechanical properties combined with excellent high temperature properties with excellent weldability on DC+. … Inconel Alloys 600 and 601, …

… Extreme easy to weld with excellent welding properties. High world wide excepted quality with controlled cast and helix … addition of 0,5% Cu this alloy offers excelent weather resistant properties.  … CuNi, Reh ≤ 460MPa ISo 15608: 1.4 1.8963, 1.8946, 1.8965 …

… E 1000 S is suitable for all positions; 2,5 mm can even be used in vertical down position. Medium fast freezing weld metal makes this electrode excellently suitable for root runs in vertical up position in pipe welding. The slag is self detaching and the …

… after long storage in unconditioned conditiond. Good gap bridging properties. In the current range (PF) of 85 - 175 A for vertical up seams suitable. … Typ 1Cr0,5Mo,V ISO 15608: ~5,1 1.7335, …

… Excelent weld puddle manipulation and overal welding properties with extreme low hydrogen content (below 3 ml/100 gr. weld … suitable for post weld heat treatment respecting the impact properties. … Reh ≤ 620 MPa ISO 15608: ~3.1, 2.2 1.8864, 1.8873, 1.8881, …

… spatter losses. High productivity and weldabillity, better wetting properties compared to solid wires. Ductile weld metal quality and X-ray … The PRE typical value of 36.1 stimulates outstanding impact properties at sub zero temperatures. … ISO 15608: (8.1), 10.1-10.2,  TÜV …

… according EN ISO 22674. The alloy offers extreme low friction properties combined with extreme corrosion resistance and excellent wear properties against scalling, abrasion and extreme pressure loads. … Overlay …

… low temperature fine grained structural steels. Excellent welding properties in combination with FL 155 high basic flux even in narrow gabs. Excellent wetting properties compare to solid wires that results in a bigger parameter range and improved deposition rate. To obtain optimum mechanical properties the heat input should be kept below 15 kJ/cm and interpass …

… AquaForce MG offers a high deposition rate with remarkable welding properties in all positions and is capable of producing beautiful flat weld … and can be used in all positions, especially suitable for vertical down (PG) position. The newly designed underwater slag system … to provide maximum resistance to moisture. Excellent mechanical properties with yield strength exceeding 500 MPa in sweet and salt water …