… High Mn alloyed welding wire that can be used in combination with the fluxes FL 155 or …

… flux cored wire with easy removable slag support for high productivity welding. Smooth drop transfer and stable arc with no spatter losses. …

… For welding heat-resistant austenitic steels of the 25% Cr, 20% Ni types. …

… requirements at sub zero temperatures down to -60 °C. Excellent welding properties.  Yield strength < 600 MPa. Low hydrogen content  …

… Het "Welding Solution Center" toont het summum van de meest innovatieve …

… Coppered solid wire for SAW welding in combination with our FL 180 flux … Unalloyed steels: St 33 – …

… plate less than 1/4 in. thick to prevent oxidation. Gas Requirements. Welding-grade argon (99.999 percent purity) usually is chosen for … gas supply should not be more than -60 degrees F (-51 degrees C). … Welding Zirconium alloys in general but also for successfully weld …

… The Ceweld 904L is used for welding materials of similar chemical composition which are used for …

… deposits are air-hardenable that can normally be heat-treated after welding. … 1.4000, 1.4001, 1.4002, 1.4003, 1.4006, 1.4008,  1.4021, …

… to buffer with an electrode like CEWELD® E DUR 350 Kb that delivers a welding deposit of less hardness. Overlays on steel with high tensile …