… Flux cored wire with slag support for high productivity welding in all positions. Excellent for use on ceramic backing … no spatters. Better wetting and welding properties with more productivity compared to solid wires … 1.4301, 1.4306, 1.4401, 1.4404, …

… flat weld beads with deep penetration and above all not sensitive for porosity and or inclusions. Filled welds exceeding an A-height … of 4,0 mm are easy to achieve in one single layer for high productivity. and can be used in all positions, especially suitable for …

… Higher productivity, higher deposition rates and improved wetting properties compared to solid wires with comparable analysis. Attractive bead appearance without slag residues. Suitable for cladding and …

… basic slag quality guarantees optimum metallurgical quality and attractive welder appeal. The weld deposit meets the NiCrFe-3 … with less spatters. Excellent results are also achieved without protective gas. … E NiCr3 / Ni6082 / NiCr15Fe6Mn  1.4816, 1.4864, 1.4876, …

… high Cr content. The alloy is fully austenitic and is therefore sensitive to hot cracking. The temperature limits for use under intermittent … a temperature of 1000°C be exceeded. This alloy can withstand relatively severe thermic shock, and is superior to type 309 L. … ISO …

… with rapidly solidifying slag (P in Standard) support for high productivity welding in all positions. Excellent for use on ceramic backing … no spatters. Better wetting and welding properties with more productivity compared to solid wires. … ISO 15608: 8.1  Austenitic ≤ 19 % Cr …

… high Cr content. The alloy is fully austenitic and is therefore sensitive to hot cracking. The temperature limits for use under intermittent … alloy is heat resistant up to 1200 °C. This alloy can withstand relatively severe thermic shock, and is superior to type 309 L. … 1.4823, …

… good penetration this alloy is used mainly in construction and automotive industry. The silicon addition results in improved fluidity … the alloy the preferred choice of welders. The alloy is not sensitive to weld cracking and produces bright, almost smut-free welds. Not …

… High productivity, high deposition rates and improved wetting properties compared to solid wires with similar analysis. Attractive bead appearance without slag residues. Best to be used with …

… Flux cored wire with slag support for high productivity. Excellent for use on ceramic backing strips. The slag is self … no spatters. Better wetting and welding properties with more productivity compared to solid wires. The 0,9 and 1,0 mm can be used for all …