… welding speed with corresponding flux.  Suitable fluxes are depending on the weld metal requirements, in most cases CEWELD® FL 155 …

… The alloy has a low carbon content which makes it particularly recommended when there is a risk of intergranular corrosion. The higher …

… in the first layer. A buffer layer with OA 4370 or OA MnCr is recommended in case of sensible basematerial or old Hardface-layers. … 59-62 …

… Ti can be used for a working temperature of up to 450ºC. The recommended preheat temperature is 200ºC - 300°C unless the base material …

… (internal shielding gas). As they produce a slag, they are not recommended for multi-pass welding. … ISO 15608: 8.1 / TüV Groupe 29 (+22+21) …

… already a High hardness in the first layer. A buffer layer is recommended in case of sensible base material or old layers. Weldable without …

… of any welding consumable and procedure before use in the intended application.  The selection and use of specific products is …

… become part of the weld deposit, Metal core fluxcored wires are recommended in spray arc to obtain the best results. The torch angle should …

… preheat temperature, interpass temperature and PWHT) will be dependent on the base material being welded, including its thickness, and …

… The temperature limits for use under intermittent oxidation depend on cycle frequency. In no case shall a temperature of 1000°C be …