1. … and neutral environments, whereas the nitrogen allows superior strength at high temperatures. Therefore, this filler wire shows … (most suitable temperature range is 850 - 1100 °C), high creep strength, very good resistance to isothermal and, particularly, cyclic …
  2. … can be polished and is scale-resistant up to 900°C. The achievable hardness of the weld metal is mainly influenced by the dilution with … the dilution and the C content of the base material, the higher the hardness of the weld metal. The preheat and interpass temperature …
  3. … deposit can be machined with tungsten tool tips and by grinding. The hardness of the weld deposit will degrees 20% at 600 °C and has a nominal hardness of 49-53 HRc at room temperature. The weld deposit is high …
  4. … recommended for welding fine grained similar alloyed high yield strength steel > 960 MPa in case high impact values are required at sub zero temperatures. Hydrogen content HD < 4 …
  5. … Weld metal deposited by SA Nicro 600 has high strength and good corrosion resistance, including oxidation resistance and creep-rupture strength at elevated temperatures. Use FL 860 ESHC flux … SA Nicro 600 …
  6. … cracks and fissures. Extreme good deposition rate compare to MMA. High strength and good bonding weld metal. NiFe36 has a composition that … heating and the cooling period. The weld deposit also retains good strength and toughness at cryogenic temperatures and has a low …
  7. … HVOF-sprayed, very dense coatings can be achieved with extreme hardness of 800-1300 HV0.3 and adhesion strength of more than 70 MPa. In comparison to WC-Co, coatings from … 5.2-5.8 g/cm³ Particle shape: preponderantly spherical Coating microhardness: 800-1300 HV0.3 Sales units: Particle size* (DIN EN 1274 3.3): …
  8. … for root welding. High-efficiency type for economic production of high-strength fine-grain structural steels up to 1100 MPa Yield Strength. Stable mechanical property values up to heat input of 10 kJ/cm. Due to the seamless production …
  9. … Solid welding wire that combines high hardness with very good corrosion resistance, shiny weld deposit with a little higher hardness than 1.4115. The weld deposit cannot be machined with normal cutting tools, grinding is possible. Hardness approximately 45 HRc. The deposit can be tempered. … 1.4016, …
  10. … Its oxidation resistance is comparable to that for other gamma-prime-strengthened superalloys. CEWELD® Alloy 263 is an age-hardenable … alloy designed specifically to combine good age-hardened strength properties with excellent fabrication characteristics in the … subject to strain age cracking problems common for gamma prime strengthened alloys.  … NIckel based alloys with simmilar composition …