… alloy offers extreme resistance against abrasion by minerals, all weld metal requires no buffer layer except on materials considered critical … completely crack free in single and multilay overlay welding. The weld metal is only machinable by grinding. Due to the production method (seamless copper coated flux cored wire) this wire can be stored …

… Due to the high resistance to cracking and toughness, all weld metal requires no buffer layer except on materials considered critical. … and shock. The interpass temperature should be maximum 250ºC. The weld metal is machinable by special carbide tools, hardening is possible. The maximum hardness is dependent on the base metal and is achieved in the first layer. For material considered …

… This Nickel - Copper weld metal has properties similar to “Monel 400”. It has good strength and … in many media, including sea water, salts and reducing acids. The weld metal is not age hardenable and when used to join Monel K-500 it has lower strength then the base metal. … 2.4360, 2.4375, NiCu30Fe, NiCu30Al, Monel 400, R405, alloy …

… CEWELD® NiCu30Mn is a Nickel - Copper weld metal and has properties similar to “Monel 400”. It has good strength … in many media, including sea water, salts and reducing acids. The weld metal is not age hardenable and when used to join Monel K-500 it has lower strength then the base metal. … 2.4360, 2.4375, NiCu30Fe, NiCu30Al, Monel alloy 400, R405, …

… offers very good resistance against abrasion by minerals, all weld metal requires no buffer layer except on materials considered critical … temperature should be kept at 270ºC for the best results. The weld metal is only machinable by grinding. Due to the production method (seamless wire) this wire can be stored for a long time without …

… a slightly higher percentage of phosphor, suitable for MIG welding, easy to handle, high plasticity of the weld metal. • High quality alloyed copper wire • The weld metal is a Copper-Silver alloy • Sound, pore free deposits and high …

… enrobées. 2) Utilisez des fils fourrés sans soudure pour le soudage Mig/Mag. 3) Toujours resécher les poudres sous arc directement avant …

… Due to the high resistance to cracking and toughness, all weld metal requires no buffer layer. Suited for wear parts subject to heavy … and shock. The interpass temperature should be maximum 250ºC. The weld metal is machinable with carbide tip tools, hardening is possible. The maximum hardness is dependent on the base metal and is usualy already achieved in the first layer. … Rails …

… Due to the high resistance to cracking and excelent toughness, all weld metal requires no buffer layer except on materials considered critical. … and shock. The interpass temperature should be maximum 250ºC. The weld metal is machinable with carbide tip tools, hardening is possible. The maximum hardness is dependent on the base metal and is achieved already in the first layer.  … Conveyors and …

… représentés en pratique : - Soudage par impulsions à grande vitesse Mig/Mag - Tables de soudage à pinces pour une fixation et une … - Soudage par rechargement de particules de carbure de tungstène Mig Welding by    Alimentation vibrante en carbure de tungstène - Fit …