… l'aluminium et l'acier inoxydable. Les calculs sont précis, car il prend en compte des variables comme les pertes, le cycle de travail, le …

… fusion boundary. Alloy C276 is possibly a more economic alternative depending on the required properties in this situation. … duplex, …

… fusion boundary. Alloy C276 is possibly a more economic alternative depending on the required properties in this situation. … duplex, …

… Carbide size: 2,5 μm FSSS Density (ISO3923-2): 4.2-5.5 g/cm³ (dependent on designated size) Particle shape: preponderantly spherical …

… This results in lower hardness and strength values, which reduces the tendency to crack, especially if the weld seams are not …

… considered critical. In this Situation Ceweld SP NiAl is recommended. Suited for wear parts subject to heavy abrasion. The interpass …

… the base metal creep properties. These consumables are specifically intended for high integrity structural service at elevated temperature so …

… layer thank to the Nb carbides. The choice for the buffer layer is depending on the base metal and not always necessary. If applied correctly …

… soudée n'est pas le cordon de soudure ; le cordon moyen ne prend qu'environ 15% du temps de travail réel. 85 % du temps nécessaire …

… influances. SA Corten wire can be used with FL188 (or an other type depending on the requirements and application). … CuNi, Reh ≤ 460MPa ISo …