Qu'il s'agisse de fils de soudure pleins ou fourrés, de baguettes Tig ou de fils et poudres pour arc submergé, d'alliages de brasage ou de fils pour projection thermique, vous êtes au bon endroit. Avec plus de 2 000 tonnes de stock et plus de 500 alliages différents, nous garantissons des délais de livraison courts.
Dans notre base de données de produits, vous pouvez trouver tous nos produits en effectuant une recherche par catégorie, nom de produit, équivalent, EN, AWS, W.Nr ou matériau à souder.
Equivalent search est le moyen le plus rapide de trouver l'équivalent CEWELD des marques les plus courantes sur le marché international.
Copper coated SAW wire best in combination with flux FL 155
High Manganese and Silicon content for improved de-oxidation and strength, excellent wetting for increased welding speed with corresponding flux. Suitable fluxes are depending on the weld metal requirements, in most cases CEWELD® FL 155 gives excellent results.
Submerged arc welding (5% chromium wire) for high temperature creep resistant steels. Flux CEWELD® FL 880
Sub arc filler metal specifically intended for high integrity structural service at elevated temperature so the minor alloy additions responsible for its creep strength are kept above the minimum considered necessary to ensure satisfactory performance. SA 90S-B9 is best to be used with FL 880 high basic agglomerated flux to obtain optimum creep properties.
High mechanical properties and very good weldability due to a increased silicon content, suitable for operating temperatures up to 300°C. Flux FL 838 of fused flux FL 880
Austenitic, non magnetic stainless steel alloy with high mechanical properties and excellent weldability, corrosion resistance is better than AISI 316 due to the high Mo. content and also offers excellent corrosion resistance against delude hot acids. Suitable for use up to 400°C. SA 317L is best to be used in combination with FL 838
Submerged arc welding wire for high temperature creep resistant 2,45%Cr 1,0%Mo ferritic steel. These steels are used for creep resisting applications up to ~550°C. The wire has low levels of tramp elements (e.g. Sn, As, Sb and P) providing a low Bruscato Factor (X< 10 ppm) for temper embrittlement resistant applications. Recommended flux: FL 155
Moderate strength with very high resistance against cracking because of its high elongation.
Flux FL 880 or FL 838
SA 308L has good general corrosion resistance. The alloy has a low carbon content, making it particularly recommended where there is a risk of intergranular corrosion. Best to be used with our agglomerated flux FL 8111, FL 838 or fused flux FL 880
SA 309LMo is a solid wire for SAW which operates with very stable, spatter free arcs. This wire deposits low carbon weld metal of about 23%Cr-13%Ni-2.3%Mo.
Cladding on low alloyed steels in case a 18/8/2 CrNiMo layer is required in the first layer.