… amazingly fast freezing and therefore especially preferred in vertical down position with high speed and deep penetration. Due to the wood …

… and is therefore sensitive to hot cracking. The temperature limits for use under intermittent oxidation depend on cycle frequency. In no case …

… copper coating for improved current carrying capacity. S2 wire can be used with FL 180, FL188, FL 155 and FL 851 depending on the …

… Nickel 200 and or other Copper -Nickel alloys. Small diameters can be used in all positions. … Cu7158 (CuNi30Mn2FeTi), 2.0838 Mat.n: 2.0878, …

… Very popular because of its soft, stable arc, its easy spatter free application and the …

… Operating temperatures up to +350 °C. CEWELD AA 4361 is primarily used in flat and horizontal positions. However, welds in other …

… you almost reach the chemical composition. Flux FL 860 ESH can be used. … ISO 15608: 8.1  Austenit ≤ 19 % Cr 9% Ni, TÜV 1000: Gr. 21 - 22 …

… nickel base alloys. Some authorities do not allow or have discontinued use of 625 type consumables for such applications, where deleterious …

… Phosphor-Copper Alloys. Ideal where the heat feeding is critical because of its low operating temperature.  Flux/Paste: CEWELD Super-Flux … … flux). Brass, Copper and Copper-Tin Alloys (with flux). Do not use in a Sulphurous environment. … L-Ag18P … 17672: CuP 286 …

… to coal ash corrosion. The alloy was originally targeted for use as A-USC boiler tubes in the superheater sections of these plants …