… positions for diameters 2.4 and 3.2mm. Diameters < 4.0mm excellent in down position. … Joining Duplex, Superduplex, super austenitic …

… are controlled to lower levels in this alloy. Suitable only in down-hand positions. … 1.4465, 1.4500, 1.4505, 1.4506, 1.4519, 1.4531, …

… welding characteristics. High impact strength at sub zero temperatures down to -60 °C. Weldable with Co2 and Mixed gas. … Reh < 690 MPa Iso …

… at high currents. The weld deposit shows reliable impact properties down to -60°C. Particularly suitable for MAG orbital welding and for …

… CrNi steels. Heat resistant up to 350°C. Excelent toughness properties down to -196°C. Good resistance to nitric acid. … ISO 15608: 8.1 …

… weld metal will show no undercut !Preheating is normally done to slow down the cooling speed, in case you can not control the cooling speed …

… purity, superior hot cracking and corrosion resistance. CVN toughness down to –120 °C, resistant to intergranular corrosion up to 400 °C. …

… manual and (semi- and fully) mechanized welding. Good quality values down to -40°C. Low spatter losses with excellent slag removability. …

… High strength weld deposit with good impact properties down to -60°C. S3 NiMo1 can be used in combination with FL 851 and FL …

… a powerful arc at very low amps. Preheating is normally done to slow down the cooling speed, in case you can not control the cooling speed …